Unfortunately, this is no longer available, but perhaps the following offers may be of interest.
Related ads
Peavey Peavey vypyr vip 3
Sziasztok! Eladó egy Peavey Vypyr Vip 3, 100w-os modellező [...] 94.000,00 HUFLine6 Spider Valve SV112 40 wattos fullcsöves gitárkombó
Eladó egy hibátlan műszaki és szép esztétikai állapotú [...] 95.000,00 HUFRoland GC-405X MIK
Roland GC-405X MIK gitárkombó. Amíg a saját oldalunkon megtalálod, [...] 85.000,00 HUFMarshall Code 50
Marshall Code 50 modellező erősítő, 4 gombos lábkapcsolóval, [...] 88.000,00 HUF
huen
The Power Engine 60 is an all-purpose, multi-function, powered extension cabinet. Packing 60 watts of transparent power, it can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats --including our very own line of SansAmps. When plugging your favorite device into a Power Engine, the tone is unaffected. So there`s no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amp.
These handsome cabinets perfectly complement our line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4˝ inputs and includes a balanced XLR output to ‘daisy-chain’ with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.
Wherever your tones come from, make the Power Engine 60 your destination for portable, pure reproduction.
SPECIFICATIONS
Input Impedance: 10kOhms
Nominal Input Level -20dBm to +4dBm
Optimal Output Load: 8 Ohms
Power Output: 60W
Maximum Power Consumption: 120W
AC Input Power (factory set): 100V, 117V, 230V, 240V
Cycles: 50/60 Hz
Speaker: Celestion® Seventy80 Model #CT2112-8 12˝, 80W
Cabinet Dimensions: 20˝l x 11˝w x 18˝h
Weight: 33 lbs
The Power Engine 60 is an all-purpose, multi-function, powered extension cabinet. Packing 60 watts of transparent power, it can be used with any direct recording device or pre-amp, analog or digital, tube or solid state, in stompbox or rackmount formats --including our very own line of SansAmps. When plugging your favorite device into a Power Engine, the tone is unaffected. So there`s no need to labor over readjusting all your parameters that would otherwise be colored by a conventional amp.
These handsome cabinets perfectly complement our line of Trademark combo amps. The Power Engine 60 will accept XLR and 1/4˝ inputs and includes a balanced XLR output to ‘daisy-chain’ with other Power Engine 60s. Knowing that not all rooms are created acoustically perfect, you can compensate for less than ideal environments by adjusting the on-board, active three-band EQ.
Wherever your tones come from, make the Power Engine 60 your destination for portable, pure reproduction.
SPECIFICATIONS
Input Impedance: 10kOhms
Nominal Input Level -20dBm to +4dBm
Optimal Output Load: 8 Ohms
Power Output: 60W
Maximum Power Consumption: 120W
AC Input Power (factory set): 100V, 117V, 230V, 240V
Cycles: 50/60 Hz
Speaker: Celestion® Seventy80 Model #CT2112-8 12˝, 80W
Cabinet Dimensions: 20˝l x 11˝w x 18˝h
Weight: 33 lbs
read the test »
Full points in the review: 8.6 ponits
You can read all the reviews from our members here »