QSC GX7 power amplifier

Description

huendeskes
Suitable for most loudspeaker types
Recommended for 4-ohm and 8-ohm loudspeaker systems
Inputs: XLR (3 pin), 6.3 mm (TRS) balanced Jack and RCA unbalanced
Output: Speakon ® Combo, 6.3mm Jack or Speakon 2-pole and 4-pole (internally linked), or screw terminals (banana plugs)
Minimum installation depth 257 mm, thus can be installed in most racks
Lightweight - less than 13.5 kg
GuardRail ™ provides protection against overload and overheating while delivering maximum power.
Front panel Power, Signal, and Clip LEDs
Built-in Subwoofer/Satellite crossover
SPECIFICATIONS

8 ohm (1 kHz, both channels driven): 725W
8 ohm (1 kHz, one channel driven): 800W
4 ohm (1 kHz, both channels driven): 1000W
4 ohm (1 kHz, one channel driven): 1200W
Signal-to-noise ratio, 20 Hz-20 kHz: 100 dB
Distortion: 1 dB below rated power, 1kHz: -8 ohm: less than 0.02%; -4 ohm: less than 0.05%
Input sensitivity (8 ohm): 1.2 Vrms
Voltage gain (8 ohm): 36.1dB
Switching technology: Class H (2-step)
Frequency response: 20 Hz - 20 kHz, +0, -1 dB
Input impedance: Greater than 20 kohm (balanced)
Maximum input signal level: +24 dB (16 Vrms)
Input connectors per channel: -Balanced: 3-pin XLR, 6.3mm jack; -Unbalanced: RCA
Output connectors per channel: Speakon®, 6.3mm jack, screw terminals
Amplifier and speaker protection: Short circuit, open circuit, thermal, RF, DC
Front panel indicators and controls: -Power On: blue LED; -Signal: green LED (at -35 dB threshold); -Clip: red LED (at 0.1% THD threshold); -Volume controls;
Rear panel controls: Full-range/crossover switch (crossover frequency 100Hz, third-order low-pass and second-order high-pass filter)
Power supply: 100, 120, 230 VAC, 50-60 Hz
Dimensions: Height: 89 mm (2 RU); Width: 483 mm; Depth: 257 mm
Weight: 7.6 kg
Barely used, excellent condition.