Custom made - Saját készítés - body

Description

huendeskes
I would part with a "half-finished" guitar. I started building a guitar with a maple body and neck 2 months ago, but unfortunately, due to lack of time, I cannot continue. The body is a B.C. Rich copy, integrated with the neck. Body thickness is 4cm. The neck is routed for the truss rod. The headstock is also cut out, just needs to be attached. I also made the truss rod from a 6mm threaded rod, with a 6mm Allen end for easier adjustment. I'm also including enough 5mm rosewood material. The material itself cost about 5,000 Ft. You can inquire at addye@freemail.hu and at 30/592-31-88.